background image

TH8 POE Injector Quick Installation Guide

About

This guide covers the the installation procedures for connecting a 12 V or 48 V POE (Power Over Ethernet) 

injector kit to a TH8 recorder. 
A POE injector kit lets the TH8 recorder connect up to 2 additional IP cameras via its expansion ports. This 

increases the recorder’s maximum channel count from 8 to a potential 10.
Note that the 12 V and 48 V POE injectors kits are separate, distinct products. This guide covers the installation 

procedure for both kits. Ensure that you are following the proper installation procedure for your kit.

Pre-requisites

Before proceeding with this document, you must first have a 

TH8 recorder with FW 2.0

 or higher installed and 

functioning in a vehicle. Do not proceed with this document if you still haven’t installed the TH8 recorder. The 

TH8 Installation Guide (Part #: 700-1123) can be found on the Safe Fleet Community (community.seon.com/

documents/). 
Note: You will need login credentials to access the documentation. Please contact tech support if you do not 

have access to the Community. 

Kit Contents 

(1 kit required per camera added)

Specifications

12 V POE Injector Adapter Harness

Materials

UL Rated Materials, Meets RoHS Requirements

Voltage Rating

60VDC Maximum

RJ45 Jack

Shielded CAT5 Rated, Gold Plated Contacts

RJ45 Power Pins

4, 5 (+) 7, 8 (-)

DC Wire Size

28AWG x 4

CAT5 Wire Size

24AWG x 8, Shielded

Cable Length

165mm (6.5”)

Total Length

254mm (10”)

Weight

31 g (1.1 oz )

Operating Temp

-40°C to 80°C (-40°F to 176°F)

Support

•  Phone: 1-844-899-7366
•  Email: [email protected]

Warranty

For full warranty information, visit: 
•  www.seon.com/documents/Seon-Warranty.pdf

2002/96/EC (WEEE directive): This product cannot be disposed of as unsorted municipal waste 

in the European Union. For proper recycling, return the product to your local supplier upon the 

purchase of equivalent new equipment, or dispose of it at designated collection points, for more 

information, see www.recyclethis.info.
2006/66/EC (battery directive): This product does not contain batteries.

© Safe Fleet | Nov 2019 | All rights reserved | Part #: 700-1172 R2

12 V POE Injector Kit (Part #: TH8POEKIT12):

•  POE Injector Harness (Part #: APPINJ) - Qty 1
•  Y-Power Harness (Part #: 060-1163) - Qty 1

48 V POE Injector Kit (Part #: TH8POEKIT48):

•  POE Inserter (Part #: 085-1106) - Qty 1
•  Y-Power Harness (Part #: 060-1163) - Qty 1
• 

Microfit Ctrl Cable (Part #: 060-0656) - Qty 1

•  1.5 ft CAT5e Cable (Part #: 085-0065)  - Qty 1
•  1” Stainless Steel Philips Rounded Head Drilling 

Screw (Part #: 600-1022) - Qty 1

Installing the 48 V POE Kit

(Refer to diagram on next page)
1.  Connect the 

Y-Power Harness 

to the TH8’s 

ACC PWR

 output

2.  Connect the other end of the 

Y-Power Harness

 to one end of the 

Microfit Control Cable (MCC)

3.  Cut off the other end of the 

MCC

 and strip the 

red

 and 

black

 wires

4.  Connect the MCC red wire to the POE Inserter’s 

VDC Input (+),

 and the black wire to the 

VDC Input ( –)

5.  Connect an ethernet cable from the TH8’s 

HD CAM EXPANSION

 port to the POE Inserter’s 

IN

 port

6.  Connect an ethernet cable from the POE Inserter’s 

OUT

 port to the camera. For the 48 V POE kit, you can 

only connect the following cameras:

•  C3W9PD
•  C3Q9PD

7.  Secure the casing of the PoE Inserter to the vehicle using the provided screw.

48 V POE Inserter

Input

12VDC/1.5A to 16VDC/1.1A.

Output

48 VDC, up to 15.4 W max. IEEE 802.3af compliant. Short circuit protection.

Ethernet

Connectivity: RJ45, auto-crossover. Wire type: 4-pair CAT5e.
Distance: up to 100 m. Speed: 10/100BaseT, half/full duplex, auto negotiation.

Indicators (LED)

Red LED: Port status.
Yellow & Green LED (by RJ45 jack): IP Link status, 10/100Base-T/active.

Agency Listings

UL/cUL: UL60950-1 (Information Technology Equipment).
CE European Conformity.

Dimensions (W x L x H) 2.5” x 3.8” x 1” (63.5 mm x 96.52 mm x 25.4 mm).
Weight (approx.)

Product Weight: 0.2 lbs. (0.1 kg). Shipping Weight: 0.25 lbs. (0.11 kg).

Temperature

Operating: 0º C to 40º C (32º F to 104º F). 
Storage: -40º C to 70º C (-40º to 158º F).

Relative Humidity

 85% +/-5%.

Operating Altitude:

-304.8 to 3,048 m (-1000 to 10,000 ft.).

Отзывы: