Emergency Lights or Siren Activated Version
TB-100 Bluetooth Transmitter Hardware Installation Guide
P a g e 14
Safe Fleet Mobile-Vision
9.26.2019
d.
If the displayed device name or serial number matches the Bluetooth Transmitter,
press the Select button.
– OR –
If the displayed device name or serial number does
not
match the Bluetooth
Transmitter, use the arrow buttons on your BWX-100 to display the correct record,
then press Select.
Once the BWX-100 has successfully synced with the Bluetooth Transmitter, a
confirmation message displays.
e.
Repeat steps a – d for all BWX-100s you wish to sync with your Bluetooth
Transmitter.
Do I have to perform the manual sync procedure at the beginning of each
recording session?
That depends on your assigned vehicle and camera. If you
always use the same vehicle and the same BWX-100, you do not have to perform
this procedure again. However, officers who use different vehicles and/or differ-
ent BWX-100s on a day-to-day basis will need to perform the manual sync proce-
dure at the beginning of each recording session.
Field test the transmission function
:
a.
Turn the vehicle on.
b.
Position the BWX-100 within 100 feet of the Bluetooth Transmitter with line-of-sight
to the antenna.
c.
Turn on the vehicle’s emergency lights or siren and verify that the BWX-100 started
recording.
d.
Manually stop the BWX-100 recording.
11
