Flashback Version
TB-100 Bluetooth Transmitter Hardware Installation Guide
Safe Fleet Mobile-Vision
9.26.2019
P a g e 9
d.
If the displayed device name or serial number matches the Bluetooth Transmitter,
press the Select button.
– OR –
If the displayed device name or serial number does
not
match the Bluetooth
Transmitter, use the arrow buttons on your BWX-100 to display the correct record,
then press Select.
Once the BWX-100 has successfully synced with the Bluetooth Transmitter, a confir-
mation message displays.
e.
Repeat steps a – d for all BWX-100s you wish to sync with your Bluetooth Transmitter.
Do I have to perform the manual sync procedure at the beginning of each
recording session?
That depends on your assigned vehicle and camera. If you
always use the
same vehicle
and the
same BWX-100
, you do not have to perform
this procedure again. However, officers who use different vehicles and/or differ-
ent BWX-100s on a day-to-day basis will need to perform the manual sync proce-
dure at the beginning of each recording session.
Field test the transmission function
.
Test Flashback-to-BWX Transmitting
: Manually start a Flashback recording. Verify
that the BWX-100 started recording, then manually stop both recordings.
Test BWX-to-Flashback Transmitting:
Manually start a BWX-100 recording. Verify that
the Flashback started recording, then manually stop both recordings.
15
