Rear View Safety, 1797 Atlantic Ave., Brooklyn NY 11233
800.764.1028 [email protected]
5
SAFETY INFORMATION
INSTALLATION
Electric shock or product malfunction may occur if this product
is installed incorrectly.
•
Use this product within the voltage range specified. Failure to do so can
cause electronic shock or product malfunction.
•
Take special care when cleaning the monitor.
•
Make sure to firmly affix the product before use.
•
If smoke or a burning smell is detected, disconnect the system immediately.
•
Where the power cable may touch a metal case, cover the cable with a
friction tape. A short circuit or disconnected wire may cause a fire.
•
While installing the RVS System be careful with the wire positioning in
order to avoid wire damage.
•
The RVS System should only be used when the vehicle is in reverse.
•
Do not watch movies or operate the monitor while driving; as it may cause
an accident.
•
Do not install the monitor where it may obstruct drivers view or obstruct an
air bag device.
•
Dropping the unit may cause possible mechanical failure.
•
When in reverse, monitor buttons are not functional
