Safe Fleet PSA Скачать руководство пользователя страница 21

Страница: 21 / 21

PSA Installation Guide

p. 21

Support Information

Support Information

Contact customer service

•  Technical Support: 1.844.899.7366
•  General Enquiries: 1.877.630.7366
•  Email: [email protected]

If your PSA system is to be returned, please contact Technical Support, and provide the model and/or serial number of your

SAM controller. Ask for a Return Merchandise Authorization (RMA) number. An RMA number allows the Service Technicians

to better track your product when it comes in for service. Please show the RMA number on the outside of the package. ANY

RETURNED PRODUCT WITHOUT AN RMA NUMBER MAY BE REFUSED.

Product information

For product information and related documentation, please visit the Safe Fleet Community:

• https://community.seon.com/

Please contact Technical Support if you do not have credentials to log in.

Warranty

Complete warranty details are available at:

https://www.seon.com/documents/Seon-Warranty.pdf

Содержание PSA





















Результаты поиска

Содержание PSA

Отзывы:

Бренды по названию

Популярные бренды

Safe Fleet PSA, Руководство по установке

Результаты поиска

Содержание PSA

Отзывы:

Бренды по названию

Популярные бренды