Safe Fleet PRIME DESIGN VRR3-FT21G-ST, Руководство пользователя

Страница: 8 / 12

PRIME DESIGN, A SAFE FLEET BRAND
▪
Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118
▪
Toll Free: 1.8.PRIME.RACK
▪
Fax: 651-552-1799
▪
Email: info@primedesign.net
▪
Website: www.primedesign.net
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
8
View From Vehicle Front
Fig. G
M8 x 25MM T Bolt
M8 Locknut
Flat Washer
VRR3-FT21G-ST BO
X
ASSEMBL
Y INSTR
UCTIONS–L POSTS & Z POSTS
2.3
2.4
Torque to 90 in-lbs.
Place the T Bolt into the notched
portion of the Front Crossbar.
3.1
3.2
Slide the T Bolt toward the right
Rotation Base Assembly
FRONT L POST
Assemble the Front L Post onto the Crossbar and T Bolt using
the hardware shown below. Do not tighten until Step 3.5.
3.3
Torque to 90 in-lbs
3.5
Slide the Front L Post outward until it fully
contacts the Rotation Base Assembly.
3.4
Contacts here
Lightly tighten the Slide Z Post nuts, then finalize the
alignment of the front edge of the Slide Z Post to the
arrow as shown below in Figure G.