Safe Fleet Prime Design VRR PC11, Быстрый старт

Страница: 9 / 12

PRIME DESIGN, A SAFE FLEET BRAND ▪ Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118
▪
Phone: 651-552-8554
▪
Toll Free: 1.8.PRIME.RACK
▪
Fax: 651-552-1799
▪
Email: info@primedesign.net
▪
Website: www.primedesign.net
TM & © 2018 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6764268, 6971563, 2364879, 8857689, 8511525, 8991889, 2271515, 2364897, 9506292, 9481313, 9481314, 9796340, 6202807, 6427889, 9415726 AND OTHER PATENTS PENDING
9
VRR-PC11
ASSEMBL
Y INSTR
UCTIONS–RIGHT SIDE RO
TA
TION
Torque to
80 in-lbs
10.8
Slide the L Post until parallel
to the Auto Clamp and the
gap between the two is
even from top to bottom
8.7
Repeat steps 10.1 - 10.8 for
the front L Post installation
10.9
Ensure both Z Post Mounting
Clamps are fully seated into
the top groove of the Upper
11.1
Slide the Z Post into the Mounting Clamp Assembly
Z POSTS
SEE QUICK START GUIDE FOR ADJUSTMENTS
Refer to the Quick
Start Guide for Z
Post positioning.
11.2
11.3
Torque to
90 in-lbs
Repeat steps 11.1
-
11.3 for
the front Z Post installation
11.4
Adjust the Cylinder Flow
Control Screw to allow
approximately 3 seconds
time for the ladder to glide
down when operating the
loaded Ladder Rack.
12
CYLINDER ADJUSTMENT