Safe Fleet Prime Design VRR-GM31-ST, Руководство пользователя, Страница: 6 / 12

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
6
Z Plate Cam
Flat Washer
M8 Locknut
Z Plate
M8 x 45MM
Even
Even
Even
Even
Rear
Front
The end of the Rear
Drive Shaft is Flush to
the Vehicle’s Bumper
Do not tighten
VRR-GM31G-ST B
ASE
ASSEMBL
Y INSTR
UCTIONS–CROSSB
AR MOUNTINGS
1.5
Leave all indicated screws on all the
Mounting Brackets loose at this time.
1.4
Apply Anti-Seize to all M8 x 65MM Carriage bolts, then
install the Z Plates using the hardware shown. Do not
tighten screws until Step 1.8
CROSSBAR ADJUSTMENT
1.3
Using two or more people, lift and position
the Ladder Rack onto the vehicle.
1.6
Position all Crossbars onto the
Mounting Brackets as shown below.
1.7
Torque all of these
Screws to 90 in-lbs