Safe Fleet Prime Design VRR-GM31-ST, Руководство пользователя, Страница: 5 / 12

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
5
M8 x 65MM
Flat Washer
M8 Locknut
1
2
VRR-GM31G-ST B
ASE
ASSEMBL
Y INSTR
UCTIONS–P
A
CKA
GING CONTENTS
FBM ASSEMBLY SEQUENCE
Due to the compound curves on the GM
van roof, the Mounting Brackets must be
assembled in the exact sequence shown.
Do not tighten or torque any fasteners
until specified.
MOUNTING BRACKETS
Apply Anti-Seize to all M8 x 65MM Flat Head Screws, then
install the Mounting Brackets using the hardware shown.
1.1
1.2
Leave all indicated screws on all the Mounting Brackets loose
at this time. Do not tighten screws until Step 1.7
Leave all these
Mounting Bracket
bolts loose