PRIME DESIGN, A SAFE FLEET BRAND
▪
Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118
▪
Phone: 651-552-8554
▪
Toll Free: 1.8.PRIME.RACK
▪
Fax: 651-552-1799
▪
Email: [email protected]
▪
Website: www.primedesign.net
TM & © 2019 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6764268, 6971563, 2364879, 8857689, 8511525, 8991889, 2271515, 2364897, 9506292, 9481313, 9481314, 9796340, 6202807, 6427889, 9415726 AND OTHER PATENTS PENDING
12
VCR3-FT21B
ASSEMBL
Y INSTR
UCTIONS–LEFT SIDE CLAMP DO
WN
M8 Locknut
Flat Washer
M8 x 35MM
Carriage Bolt
View from vehicle front
NOTE:
The orientation of
the bolt hole faces away
from the Crossbar
Place the Front Hook Clamp Bracket removed in Step 16.1
into the lower groove of the Crossbar, and slide it on top of
the Front Ladder Hook Clamp
16.3
16.4
Reassemble the Front Clamp Down Tube Holder
using the fastening hardware removed at Step
16.1. Do not tighten until Step 16.6
16.6
Torque to 90 in-lbs
16.5
Adjust the Front Hook until it aligns with the Rear Hook. Perfect
alignment may not be possible in all instances, and depends
upon the location of the Crossbar Mounting Brackets. If such
interference should occur, align the Hook as close as possible.
USAM-VCR3FT21B-US01 Rev-E 0419
17
Place the Quick Start Guides into
the vehicle’s glove box for ladder
setup and adjustment.
QUICK START GUIDE
Содержание PRIME DESIGN VCR3-FT21B
Страница 1: ......
