Safe Fleet Prime Design VBR-TC11B, Руководство по сборке

Страница: 9 / 12

PRIME DESIGN, A SAFE FLEET BRAND ▪ Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118
▪
Phone: 651-552-8554
▪
Toll Free: 1.8.PRIME.RACK
▪
Fax: 651-552-1799
▪
Email: info@primedesign.net
▪
Website: www.primedesign.net
TM & © 2018 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6764268, 6971563, 2364879, 8857689, 8511525, 8991889, 2271515, 2364897, 9506292, 9481313, 9481314, 9796340, 6202807, 6427889, 9415726 AND OTHER PATENTS PENDING
9
Slide L Post Bracket Clamp
into bottom groove, then slide
into L Post Bracket as shown
9.4
9.6
Bracket Clamp sits
in L Post Bracket
as shown
9.5
Note: The orientation of
the bolt hole faces away
from the Crossbar
VBR-TC11B
ASSEMBL
Y INSTR
UCTIONS–RIGHT SIDE RO
TA
TION
Beginning with the Rear
Crossbar, loosen the bolt at the
bottom of the Auto Clamp, then
slide the Auto Clamp toward the inside
end of the Rotation Upper. Reposition
the Auto Clamp leaving a minimum
of 1/4” distance from the rubber
bumper to the edge of the Auto Clamp
Bracket as shown, then finger-tighten if
adjusting later, or torque to 80 in-lbs.
Ensure the Auto Clamp Spring is
seated into the spring catch
9.3
Place the L Post into the
bottom groove of the
Rear Crossbar, ensuring
the L Post seats into the
Crossbar’s inside bottom
groove as seen from the
front of the Rear Crossbar
9.2
Prepare the L Post by removing the hex head bolt, lock
washer, flat washer, and Bracket Clamp. Retain for
installation Steps 9.4
-
9.8.
L POSTS
SEE QUICK START GUIDE FOR ADJUSTMENTS
NOTE: The Auto Clamps may come preset from the factory
for packaging purposes only. To assemble the L Posts to the
Crossbars, the Auto Clamps may need to be repositioned.
9.1