Safe Fleet Prime Design PRR 0005, Руководство по сборке

Страница: 14 / 16

PRIME DESIGN, A SAFE FLEET BRAND ▪ Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118
▪
Phone: 651-552-8554
▪
Toll Free: 1.8.PRIME.RACK
▪
Fax: 651-552-1799
▪
Email: info@primedesign.net
▪
Website: www.primedesign.net
TM & © 2018 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6764268, 6971563, 2364879, 8857689, 8511525, 8991889, 2271515, 2364897, 9506292, 9481313, 9481314, 9796340, 6202807, 6427889, 9415726 AND OTHER PATENTS PENDING
14
PRR-0005
ASSEMBL
Y INSTR
UCTIONS–LEFT SIDE RO
TA
TION
Torque to
80 in-lbs
17.8
Slide the L Post until parallel
to the Auto Clamp and the
gap between the two is
even from top to bottom.
17.7
Repeat steps 17.1
-
17.8 for
the front L Post installation.
17.9
Ensure both Z Post Mounting
Clamps are fully seated into
the top groove of the Upper.
18.1
Slide the Z Post into the Mounting Clamp Assembly.
Refer to the Quick
Start Guide for Z
Post positioning.
18.2
18.3
Torque to
90 in-lbs
Repeat steps 18.1 - 18.3 for
the front Z Post installation.
18.4
Z POSTS
SEE QUICK START GUIDE FOR ADJUSTMENTS
Adjust the Cylinder Flow
Control Screw to allow
approximately 3 seconds
time for the ladder to glide
down when operating the
loaded Ladder Rack.
19
CYLINDER ADJUSTMENT