Safe Fleet PRIME DESIGN OCM-3031, Быстрый старт

Страница: 6 / 8

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
6
Rear
Front
Even Even
OCM-3031 ASSEMBL
Y
INSTR
UCTIONS
TENSION BRACE INSTALLATION
3.2
Torque all to Connector
Hardware to 90 in-lbs
4.1
CROSSBARS
CROSSBAR ADJUSTMENT
2.3
3.1
Torque Front Mount Hardware to 90 in-lbs as shown.
NOTE: Finger-tighten Mid and Rear Mounts only at this time.
Final Adjustments will be shown in your configuration’s
FBM Manual.
Set Crossbars into the
Mounts as shown.
Install M8 Nut Brackets and Hardware from HKT-0182 as
shown, but do not fully tighten. 20MM Bolts, Lock Washers,
and Flat Washers are used as shown.
Lock Washer
Flat Washer
M8 x 20MM