Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
8
FBM-1015-BLK
ASSEMBL
Y INSTR
UCTIONS–LR L
WB UNIVERSAL FBM
1E
1A
3E
3A
2E
2A
Rear
Front
Mid
Front
Front
4.50”
5.00”
Rear
Rear
LOW ROOF LONG WHEEL BASE (135.00”)
FBM ASSEMBLY SEQUENCE
Loosen bolts
Mounting Foot
Bracket
MOUNTING BRACKETS
Remove the hardware on all Channel Mounting Brackets.
1
CHANNELS
2.1
Install the Connector Plates, Foam Pads, Mounting Foot
Brackets, and End Caps in the sequences shown below.
NOTE:
If installing the ErgoRack 2 Crossbar model, see
Page 12 AFTER installing all Mounting Foot Brackets.
Foam Pad
End Cap
Connector Plate
Mounting Foot Bracket
Mounting Foot Bracket
NOTE: Base, Rotation, Crossbar, and Side Rail features are shown for
illustrative purposes only. These features are not included with this Base
Mounting Kit, and must be purchased separately.
