Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
4
Rear
Front
Mid
Front
Front
4.50”
5.00”
Rear
Rear
1E
3E
2E
1A
3A
2A
FBM-1015-BLK
ASSEMBL
Y INSTR
UCTIONS–LR MWB UNIVERSAL FBM
LOW ROOF MEDIUM WHEEL BASE (126.00”)
FBM ASSEMBLY SEQUENCE
Loosen bolts
MOUNTING BRACKETS
Loosen the bolts on the Channel Mounting Brackets.
If installing the optional Center Crossbar, loosen the
bolts on the two Mid Mounting Brackets (MPK-0038).
1
CHANNELS
2.1
Install the Connector Plates, Foam Pads, Mounting Brackets,
and End Caps in the sequences shown below.
NOTE:
If installing the ErgoRack 2 Crossbar model,
see Page 12 AFTER installing all Mounting Brackets.
Foam Pad
Connector Plate
Mounting Foot
Bracket
NOTE: Base, Rotation, Crossbar, and Side Rail features are shown for
illustrative purposes only. These features are not included with this Base
Mounting Kit, and must be purchased separately.
