Safe Fleet Prime Design FBM-1012-BLK, Руководство по сборке, Страница: 5 / 12

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
5
Vehicle
Rear
Vehicle
Front
Rear
Front
7.00”
7.75”
FBM-1012-BLK
ASSEMBL
Y INSTR
UCTIONS–L1 MOUNTING
Do not mount the Crossbars to this FBM system at this time.
Refer to the respective FEA or AR Assembly Manual(s) included
with your chosen rack configuration features. Depending upon
the features chosen, you may need to perform a complete feature
assembly onto the Crossbars or Side Rails as noted in that feature’s
Assembly Manual.
WARNING: Failure to position the Crossbars as shown in this FBM
Assembly Manual may result in damage to the sliding door and/or
ladder rack.
NOTE: Crossbars, Side Rails, Base, Clamp Down, or Rotation features
are not included in this FBM kit, and must be purchased separately.
To purchase applicable features and accessories, please contact
your authorized distributor, or a Prime Design Sales & Service
Representative.
2E.1
2E.2
CROSSBAR
ADJUSTMENT L1 CROSSBARS (ERGORACK)
Torque all of these
Crossbar Clamp
nuts to 90 in-lbs
Shown with LH Base, and
RH Rotation for illustrative
purposes only