Safe Fleet Prime Design FBM-1012-BLK, Руководство по сборке, Страница: 4 / 12

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
4
Rear
Front
Lef
t
Right
Channel Rear Channel Front
60.00”
ErgoRack & AluRack
2.25”
Fig. 2
FBM-1012-BLK
ASSEMBL
Y INSTR
UCTIONS–L1 UNIVERSAL FBM
1.6
Reinstall the Mounting Bracket Nut hardware as
shown, and set Mounting Brackets to distances
shown in Fig. 2. Finger-tighten into position–
do not torque until Steps 2.3–2.4.
Install the Front Mounting Brackets from Step 1.1 as
shown and slide into position over the Bracket Nut.
1.5
Loosen bolts
1.4 1.3
Foam pad
End Cap
Mounting Plate
Mounting
Bracket
Loosen Bolt
Install Channel Hardware as shown below.
Install fastening hardware through the Channels as shown
then torque the nuts to 60 in-lbs.
M6 x 30MM Bolt
Flat Washer
Sealing Washer
Fender Washer
Locknut
Channel