Safe Fleet PRIME DESIGN CON8505, Быстрый старт

Страница: 6 / 12

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
6
CON-8505
ASSEMBL
Y INSTR
UCTIONS– GEN 4 CONDUIT CARRIER
Varies Even
Even
Flat Washer
Lock Nut
1.1
Place the Conduit Carrier
Bracket into the Crossbar’s
bottom groove as shown.
CONDUIT CARRIER MOUNTINGS
1.2
1.2
1.3
M8 X 25MM Bolts
1.5
Torque to 80 in-lbs
1.4
Center the front and rear of the Conduit Carrier evenly between
the Left and Right Rotations. Position the back end of the
Conduit Carrier according to your rack model, but no further
back than the end of the Drive Shaft.
Flat Washer