Safe Fleet PRIME DESIGN ASH-8033 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 8

Safe Fleet PRIME DESIGN ASH-8033 Скачать руководство пользователя страница 5

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).

▪

TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING

5

Even

Even

M8 x 25MM

M8 x 30MM

Center the Accessory Light Holder evenly between the Uppers

as seen below. Torque Strip Nut hardware to 90 in-lbs.

2.3

Attach the GoLight Holder to the Mounting Clamp

using the hardware shown and torque to 90 in-lbs.

2.4

2.1

Place the Nut Brackets into the Crossbar as shown.

LIGHT HOLDER INSTALLATION

2.2

Assemble the Light Holder Mount onto the Crossbar using the

hardware shown below. Torque nuts to 90 in-lbs.

ASH-8033 ASSEMBL

Y

INSTR

UCTIONS

«
...
3
4
5
6
7
...
»

Содержание PRIME DESIGN ASH-8033









Отзывы:

Нет отзывов