manualshive.com logo in svg

Safe Fleet Prime Design AR1908, Руководство пользователя

Поделиться
Скачать
Safe Fleet Prime Design AR1908 Скачать руководство пользователя страница 17

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability 
(the “Prime Design Limited Warranty”). 

▪

 TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING

17

FBM-1017 

ASSEMBL

Y INSTR

UCTIONS–MR/HR L

WB UNIVERSAL FBM

Lef

t

Right

Rear

Front

Channel Rear

Channel Front

(B) 48.00” ErgoRack

   31.50” AluRack

(B) 48.00” ErgoRack

   47.25” AluRack

 (A) 96.00” ErgoRack

    78.75” AluRack

Flush

Rear

Front

Lef

t

Right

M8 X 20MM

Lock Washer

Flat Washer

Rear

Front

Fig. B

Contact

Fig. B

Fig. A

Flush

Fig. A

Apply silicone sealant 

(not provided) to screws 

Mid Crossbar 

Strip Nut

2.6

Loosen nuts

3 Crossbar models: Position 

the rear and center Mounting 

Brackets as shown.

Attach Mounting Brackets to the Aluminum 

Strip Nuts located in the Channels

2.5

2.2

The Channels include  

aluminum Strip Nuts for a  

3 Crossbar configuration. 

For 2 Crossbar configurations, 

disregard the extra Strip Nut.

2.3

Move the Rear Channel 

until the Mount contacts 

the End Cap. Torque nut 

to 90 in-lb. 

 

Push the Front Channels 

firmly against the Rear 

Channels. The Channel 

Cap Screws will make 

full contact. Torque all 

remaining nuts and 

bolts to 90 in-lb.

2.7

Set to distances shown below: 

Use Dimensions A for 2 Crossbar models.

 

Use Dimensions B for 3 Crossbar models.

 

 

Do not torque the Crossbar Mounting Brackets until Step 3.4. 

Finger-tighten them into designated dimension to hold them in 

place, then proceed to your Feature (FEA) Assembly Manual.

2.4

Torque all M8 x 25MM Flat Head Screws to 

150 in-lbs. Apply Silicone Sealant to screw 

heads to seal against water intrusion.

*2 & 3 Crossbar models: 

Position the front Mounting 

Brackets as shown.

*2 Crossbar ErgoRack models: 

See Page 24 regarding center 

Crossbar Mounts. 

Содержание Prime Design AR1908

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды