manualshive.com logo in svg

Safe Fleet Prime Design AR1908, Руководство пользователя

Поделиться
Скачать
Safe Fleet Prime Design AR1908 Скачать руководство пользователя страница 10

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability 
(the “Prime Design Limited Warranty”). 

▪

 TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING

10

Vehicle

 Rear

Vehicle

 Front

Flush to rear of Channel

Vehicle

 Re

ar

Vehicle

 Fro

nt

10.00”

10.00”

Rear

Front

9.25”

Center

(if equipped)

* NOTE-VBB and VCC Rack Models (no Rotations):

Offsets are even on the Left and Right sides.

3E.2

CROSSBAR ADJUSTMENT

Torque all of these 

Crossbar Clamp 

nuts to 90 in-lbs

3E.1

CROSSBARS

Shown with LH Base, and 

RH Rotation for illustrative 

purposes only

3E.3

3E.4

3E.4

Torque only the Rear Crossbar Mounting 

Bracket bolts to 90 in-lbs at this time.

The Center (if equipped) and Front 

Crossbar Mounting Brackets will 

be torqued to specification when 

designated in the respective Feature 

(FEA) Assembly Manual.

Do not mount the Crossbars to this FBM system at this time.

Refer to the respective FEA or AR Assembly Manual(s) 

included with your chosen rack configuration features. 

Depending upon the features chosen, you may need to 

perform a complete feature assembly onto the Crossbars or 

Side Rails as noted in that feature’s Assembly Manual.  

 

WARNING: Failure to position the Crossbars as shown in this 

FBM Assembly Manual may result in damage to the sliding 

door and/or ladder rack.

NOTE:

 Crossbars, Side Rails, Base, Clamp Down, or Rotation 

features are not included in this FBM kit, and must be 

purchased separately. To purchase applicable features and 

accessories, please contact your authorized distributor, or a 

Prime Design Sales & Service Representative.

 

Verify the specified 

distance from the 

ends of both Rear 

Crossbar Mounting 

Brackets to the ends 

of both Channels.

FBM-1017 

ASSEMBL

Y INSTR

UCTIONS–LR L

WB M

O

U

N

TI

N

G

Содержание Prime Design AR1908

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды