100307937: 2 of 3; Rev A; Rev Date 21-JUN-2016
4
5
3
6
7
8
Safco Products Company, Minneapolis, MN 55428
Push the B Pad into the bottom of the shell.
Place the Rectangular Partitions ( C and D for
Model 3079; E , F and G for Model 3081) in order
by height. Push the Triangular Partitions ( H for
Model 3079; I for Model 3081) down into the slots
until the "locking cut" is fully seated and the
partition bottoms are even.
Slide the J Open Channels over the RECTANGU-
LAR partitions; then slide the K Closed Channels
over the triangular partitions.
Place the assembled divider into the shell.
Remove the backing material from the L Rubber
Feet, and place them on the printed squares; press
fi
rmly.
Completed Upright Roll File.
B
LOCKING CUTS
K
L
J
