1850-37: 3 of 4; 06/02
Safco Products Company, New Hope, MN 55428
FRONT
M
N
Position the J Bottom Panel so the
finished edge is at the front and with the
arrows on the Locking Cams pointing
toward the Screw Posts, insert the Screw
Posts into the holes on the bottom end of
the Right Side Panel and fasten by turning
the engaged cams CLOCKWISE as far as
they can turn.
Insert four L Wood Dowels into the holes
on the ends of the K Kick Panel. Insert the
Kick Panel into the Left Side Panel as
shown.
4
K
Push the two M Swivel Casters with Brakes
into the sockets of the Caster Brackets at
the front of the unit. Push the two N
Swivel Casters without Brakes into the
caster brackets near the back of the unit.
6
Raise the C Right Side Panel so it is
perpendicular to the work surface. Align
the Screw Posts with the corresponding
holes on the Back Panel, Bottom Panel and
Fixed Shelf (also guide the Wood Dowels
on the Kick Panel into the side panel), then
fasten by turning each of the engaged
cams CLOCKWISE as far as they can turn.
5
C
J
L
L
CAMS
CAMS
FRONT;
FINISHED EDGES
