Safavieh Esma MED9601 Скачать руководство пользователя страница 8

Страница: 8 / 8

TIPPING RESTRAINTS KIT INSTALLATION GUIDANCE

AA1 x 2

AA2 x 4

AA3 x 4

AA4 x 4

AA1

AA4

Different wall materials require unique wall fasteners.

The wall plugs (AA2) and screws (AA3) are designed for fixing to concrete walls only.

Please consult your local hardware store to ensure you are using the correct hardware for your wall type.

AA2

AA1

AA3

AA1

1. Attach bracket (AA1) securely to the back top of the furniture using screw (AA4) provided. Allow 8 - 10 cm from each side.

2. Please make a hole for

wall plugs

position on the wall and minimum 15 mm below bracket secured to the back of unit attach the wall

plugs (AA2).

3. Locate the other bracket (AA1) on the wall over

wall plugs

(AA2). Place furniture into position so both brackets (AA1) are vertically in the

line.

4. Lace the end of the restraints strap through the larger hole in each brackret. Ensure the restraints strap with grids surface facing the inner

loops. Bring both ends together and slide the flat end through the locking end and draw it through until all slack is removed.

5. Make sure that the strap is securely laced & locked.

Installation Instructions :

8-10cm

Grids Surface

Содержание Esma MED9601








