2
©2018 SAFARI Montage All Rights Reserved
Step 1 – Unpack Hardware
Carefully remove the SAFARI Montage server and the following items from the box and place them on a
flat surface. If you are missing any of the items below, please call 1-800-843-4549.
*OS and Content hard drives shipped separate from the server.
Step 2 – Install the SAFARI Montage Server
Install the server in the rack mount enclosure, using the supplied mounting brackets or rails and screws.
There should be adequate airflow around the serverto prevent overheating.
Step 3 – Connect the SAFARI Montage Server
a.
Using the image below as a guide, connect the server to the network by plugging an Ethernet
cable into an active Ethernet port on your network.
b.
Connect a monitor and keyboard to the server.
c.
Connect the power cord(s) from the back of the server into your UPS.
NOTE: Please see your hardware warranty for terms related to your server’s environmental conditions
and electrical power.
Power Cord (2 for WAN)
Keys (2)
(Styles may vary)
Ethernet Cable
Mounting Kit (Mounting Brackets
Shown)
