13
XL-FW10028UM-en-US Rev B · 2021-08-04 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Operation Instructions
7. Disconnect the air and electrical lines
from the trailer and secure to the tractor.
8. If equipped, pull the secondary lock
release handle and hook on the top
plate casting
(Figure 21)
.
9. Pull the release handle
(Figure 22)
.
If air release is equipped, pull and hold
the fifth wheel release valve until the
locking mechanism opens and locks
into place.
10. Ensure that the locking mechanism is
open and the yoke shaft is in the out
position
(Figure 23)
.
11. Release the tractor parking brake and
slowly pull forward 12"-18" (306-457 mm)
to disengage the kingpin from the
fifth wheel. The fifth wheel should be
between the front edge of the trailer
and the kingpin
(Figure 24)
.
IMPORTANT:
DO NOT drive the tractor
free of the trailer.
SLOWLY PULL FORWARD
AND STOP
Figure 24
Figure 21
Figure 22
Figure 23
YOKE SHAFT IN OUT POSITION
