SAF-HOLLAND Low Lube FW33 Series Скачать руководство пользователя страница 18

Страница: 18 / 32

XL-FW10028UM-en-US Rev B · 2021-08-04 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,

and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.

Maintenance Procedures

12. Lube Plate Inspection

Thoroughly steam clean the top surface
of the fifth wheel for visual inspection.
Replace the lube plates if:



One or both lube plates is missing.



A straight edge laid across the lube

plate contacts any metal portion of the

fifth wheel surrounding the lube plates

(Figure 37)



Lube plates are severely chipped, worn,

cracked, gouged or bent.



20% (40 sq. in.) or more of lube plate

coating is missing from one or both

plates due to normal wear or damage.

13. Fifth Wheel Lubrication



FW31 and FW33 Series fifth wheels

are both equipped with NoLube lube

plate inserts that eliminate the need

to lubricate the fifth wheel-to-trailer

contact surfaces.



Thoroughly clean the locking

mechanism every six (6) months or

60,000 miles.

13.1 FW31 (NoLube) Series:



FW31 Series fifth wheels are equipped

with NoLube lock coating technology.

The lock components are protected

with a low-friction coating which

provides long wear life and corrosion

protection, eliminating the need for

lubrication. The locking mechanism

of a new FW31 Series fifth wheel

assembly has a thin layer of grease

applied by SAF-HOLLAND to aid the

components for an initial “break-in”

period. Grease will not adversely affect

a FW31 Series NoLube fifth wheel.

IMPORTANT:

If the FW31 Series

NoLube fifth wheel

operates in snowy or

icy winter conditions,

maintenance should be

performed every spring

to ensure optimum

operation. FW31 Series

NoLube fifth wheels that

are exposed to harsh

and dry chemicals and/

or road salt should be

steam cleaned and the

(B) cam profile, (D)

secondary lock where

contact is made with

the cam plate, and (E)

release handle should

be lubricated per

Section 13, Step 1.a.

13.2 FW33 (Low Lube) Series:

IMPORTANT:

Fifth wheel lubrication

is necessary to get the

maximum service life

from the FW33 Series

fifth wheel. Perform the

following procedures at

the intervals listed.



FW33 Series fifth wheel locking

mechanisms require periodic lubrication.



Lubricate the FW33 Series fifth wheel

locking mechanism every three (3)

months or 30,000 miles.

IMPORTANT:

If the FW33 Series

fifth wheel operates

in snowy or icy winter

conditions, lubrication

should be performed

every spring in addition

to routine lubrication (as

noted above) to ensure

optimum operation.

Содержание Low Lube FW33 Series

































Результаты поиска

Содержание Low Lube FW33 Series

Отзывы:

Похожие инструкции для Low Lube FW33 Series

Бренды по названию

Популярные бренды

SAF-HOLLAND Low Lube FW33 Series, Установка, эксплуатация, техническое обслуживание и устранение неисправностей

Результаты поиска

Содержание Low Lube FW33 Series

Отзывы:

Похожие инструкции для Low Lube FW33 Series

Бренды по названию

Популярные бренды