19
XL-FW10009UM-en-US Rev F · 2021-06-16 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND,
HOLLAND, SAF, and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Maintenance Procedures
Figure 40
PISTON
SHAFT
ILS SLIDERS
ILS SLIDERS
Figure 41
SUPPLY
FITTING
Figure 42
Figure 43
PISTON SHAFT
SUPPLY FITTING
SEVERE-DUTY
SLIDERS
SEVERE-DUTY SLIDERS
13. Slide Base Lubrication
NOTE:
Slide base should be moved fore
and aft at least once a year to
maintain optimum performance.
IMPORTANT:
If equipped with air
release, lubricate the air
cylinder every three (3)
months or 30,000 miles
whichever comes first.
ILS (Integrated Low-Weight) Sliders:
1. Spray the spring-covered piston
shaft thoroughly with penetrating oil
(Figure 40)
.
IMPORTANT:
DO NOT use any abrasives
on the exposed shaft as
abrasives could damage
the piston shaft.
2. Remove the supply air line and add two to
four (2-4) drops of air tool oil to the cylinder
through the supply fitting. Re-install the
supply air line
(Figure 41).
3. Activate and de-activate the air cylinder
two to three (2-3) times to work the air
tool oil into the cylinder and onto the
piston and verify proper operation.
Severe-Duty Sliders:
1. Spray the spring-covered piston
shaft thoroughly with penetrating oil
(Figure 42)
.
IMPORTANT:
DO NOT use any abrasives
on the exposed shaft as
abrasives could damage
the piston shaft.
2. Remove the supply air line and add two to
four (2-4) drops of air tool oil to the cylinder
through the supply fitting. Re-install the
supply air line
(Figure 43)
.
3. Activate and de-activate the air cylinder
two to three (2-3) times to work the air tool
oil into the cylinder and onto the piston and
verify proper operation.
