SAF-HOLLAND CBXA 40, Инструкция по установке и эксплуатации

Страница: 8 / 24

8
XL-AS20053BM-en-US · 2016-09-27 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Model Identification and Nomenclature
4. CBXA 40 Model Identification
The CBXA 40 suspension serial tag is located on the rear
crossmember
(Figure 8) .
NOTE: Refer to the serial number tag attached to the slider
rear crossmember for information (Figure 8) .
NOTE: If the suspension serial tag is not legible or is not
available, you can identify your suspension model
by the appearance of the equalizing beam. The
CBXA 40 model will have an H-shaped cast beam,
5.75" axle, and a lower air spring mounting plate
welded to the beam
(Figure 8) .
NOTE: This manual applies to the suspension models
listed on the front cover. However, we urge you to
determine your specific model number, write that
information below and refer to it when obtaining
information or replacement parts
(Figure 9) .
5. CBXA 40 Model Nomenclature
The sample tag illustrated will help you interpret the information
on the SAF-HOLLAND
®
, Inc. serial number tag. The model number
is on the first line along with the suspension capacity. The second
line contains the part number and the serial number
(Figure 9) .
Figure 9
Figure 8
TAG LOCATED ON
REAR CROSSMEMBER
CB X A 40 - 48 16
Cast Beam
Axle Capacity
Suspension Series
40,000 Tandem
Aero Beam
5.75" Diameter Premium Axle
Slider Box Width
42" (1067 mm) Wide
48" (1219 mm) Wide
54" (1372 mm) Wide
Ride Height
16" (406 mm)
16.5" (419 mm)
17" (432 mm)
18" (445 mm)
H-SHAPED CROSS
SECTION