6
XL-AS20053BM-en-US · 2016-09-27 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Decal Requirements
SwingAlign
™
Axle Alignment Decal: XL-AR372-01
(Figure 4)
.
Torque Decal: XL-AR418-01
(Figure 5)
.
It is the responsibility of the end user to periodically inspect
all decals and ensure that they are clean and completely legible.
If any decals are missing, loose, damaged or difficult to read,
contact SAF-HOLLAND
®
Customer Service at 888-396-6501
to order replacements immediately.
Figure 4
Figure 5
ALIGNMENT BOLT IS ON THE FRONT OF THE ROADSIDE FRAME BRACKET:
XL-AR372-01
STEP 1.
Before aligning axle, pull trailer forward in a straight line for a sufficient distance to insure there are no binds
in the suspension and then lock the brakes so the slider lock pins rest against the rear of the body rail holes.
STEP 2.
Check to verify trailer is empty and emergency brakes are
NOT
engaged.
STEP 3.
Rotate bolt
CLOCKWISE
to move axle forward (A arrows);
COUNTERCLOCKWISE
to move axle rearward (B arrows).
A = axle forward
B = axle rearward
ALIGNMENT BOLT HEAD
NOTE:
1/2 turn of
free play in either
direction (A or B)
is acceptable.
SWINGALIGN
™
NON-WELDED AXLE ALIGNMENT PROCEDURES
www.safholland.us
Copyright © 2011 • SAF-HOLLAND, Inc.
Содержание CBXA 40
Страница 2: ......
