6
XL-AS20012BM-en-US Rev B · 2014-05-28 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND,
SAF, and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Model Identification and Nomenclature
Figure 9
4. CBX69 Model Identification
The CBX69 Fusion suspension serial tag is located on the rear
crossmember
(Figure 8)
.
NOTE:
Refer to the serial number tag attached to the slider
rear crossmember for information
(Figure 8)
.
NOTE:
If the suspension serial tag is not legible or is not
available, it can identified by the appearance of
the equalizing beam. The CBX69 will be installed
on a tri-axle sliding sub-frame and have a 5.75"
round axle,
(Figure 8)
.
NOTE:
This manual applies to the suspension models
listed on the front cover. However, determine
specific model number, write that information
below and refer to it when obtaining information
or replacement parts
(Figure 9)
.
5. CBX69 Model Nomenclature
The sample tag illustrated will help interpret the information
on the SAF-HOLLAND
®
, Inc. serial number tag. The part
number is on the first line. The model number along with the
suspension capacity are on the second line. The third line
contains the serial number
(Figure 9)
.
CB X 69 - 48 16
CB Slider
Axle Capacity
Suspension Series
69,000 Tridem
5.75" Diameter Premium Axle
Slider Box Width
42" (1067 mm) Wide
48" (1219 mm) Wide
54" (1372 mm) Wide
Ride Height
16" (406 mm)
16.5" (419 mm)
17" (432 mm)
18" (445 mm)
Figure 8
TAG LOCATED ON
REAR CROSSMEMBER
