Saf-Fro BUFFALO 405X, Руководство оператора

Страница: 13 / 157

English 9 English
13. Power Input Socket: Connect the supply plug to the
existing input cable, that is rated for the machine as
indicated in this manual, and conforms to all applicable
standards. This connection shall be performed only
by a qualified person.
14. Hole covered: For 48Vac socket K14027-1.
15. Hole covered: For circuit breaker which protects the
48Vac socket K14027-1.
16. Fuse: This fuse protects the Fan Circuit.
Stick Welding (MMA)
For starting welding process with MMA method you
should:

Insert welding cable plugs into output sockets and
twist to lock them in place.

Connect the work cable to the welding piece with the
work clamp.

Fasten a correct coated electrode into the electrode
holder.

Connect the main plug to the outlet mains socket.

Set the Local/Remote Switch in required position: local
or remote.

Turn the Power on/off Switch on.

Set required welding current by knob of the Output
Current Control.

Obeying appropriate rules you can begin to weld.
Maintenance
WARNING
For any maintenance or repair operations it is
recommended to contact the nearest technical service
center or Lincoln Electric. Maintenance or repairs
performed by unauthorized service centers or personnel
will null and void the manufacturers warranty.
The frequency of the minatenance operations may vary in
accordance with the working environment where the
machine is placed.
Any noticeable damage should be reported immediately.
Routine maintenance (everyday)

Check cables and connections integrity. Replace, if
necessary.

Check condition and operation of the cooling fan.
Keep clean its airflow slots.
Periodic maintenance (every 200 working hours but
not more rarely than once a year)
Perform the routine maintenance and, in addition:

Keep clean the machine. Using a dry ( and low
pressure) airflow, remove the dust from the external
case and from inside of the cabinet.

Check and tighten all screws.
WARNING
Mains supply network must be disconnected from the
machine before each maintenance and service. After
each repair, perform proper tests to ensure safety.
Customer Assistance Policy
The business of The Lincoln Electric Company is
manufacturing and selling high quality welding equipment,
consumables, and cutting equipment. Our challenge is to
meet the needs of our customers and to exceed their
expectations. On occasion, purchasers may ask Lincoln
Electric for advice or information about their use of our
products. We respond to our customers based on the best
information in our possession at that time. Lincoln Electric
is not in a position to warrant or guarantee such advice,
and assumes no liability, with respect to such information
or advice. We expressly disclaim any warranty of any
kind, including any warranty of fitness for any customer’s
particular purpose, with respect to such information or
advice. As a matter of practical consideration, we also
cannot assume any responsibility for updating or
correcting any such information or advice once it has
been given, nor does the provision of information or
advice create, expand or alter any warranty with respect
to the sale of our products
Lincoln Electric is a responsive manufacturer, but the
selection and use of specific products sold by Lincoln
Electric is solely within the control of, and remains the sole
responsibility of the customer. Many variables beyond the
control of Lincoln Electric affect the results obtained in
applying these types of fabrication methods and service
requirements.
Subject to Change – This information is accurate to the
best of our knowledge at the time of printing. Please refer
to
www.saf-fro.com for any updated information.