M.HIST.0101.23 R2
Page 11 of 36
January, 26
th
2021
4. MODE OF OPERATION
NEG POWER
has a touch screen display to control all the pumps together and in a very friendly
way; it is also possible to control the NEG POWER by the SAES remote control software.
The most popular SAES NEG pumps are preset in the software (like the GP SORB AC, the
CapaciTorr, CapaciTorr HV and NEXTorr families).
ATTENTION:
Before starting to heat the getter pump, check it is under high vacuum level.
If heated in air, the getter pump could burn.
4.1. Power
on
Turn on the NEG POWER pushing the ON/OFF power button.
Wait some seconds for the display to switch on and the instrument to initialize.
4.2. The
General
Menu
When the instrument is switched on, the general menu is shown. This same screen is meant to be
used during normal operation as a summary of the overall status.
This menu presents an overview of main operational parameters, pump status, model, electrical
and temperature values and on time.
This menu is read only and does not allow any changes to the configuration.
On the right side of the screen, 4 start/stop buttons allow switching on/off the outputs one by one
and they are visible in most pages (see paragraph 4.7).
The General Setup button
