SAelen TS GS/TIGER 25P, Техническое руководство

Страница: 23 / 60

ATTENTION !
If for any reason, the chipper has difficulties chipping the material and you need to
stop it:
do not restart the engine without removing the blockage and removing
the material from the rotor!!!
Oper ation
A steady base is to be ensured before initialisation (place any brake wedges is in
front of the wheels
1) Check whether the cover above the chute is open.
2) Set the engine to idle position.
3) Preheat 10 secondes (DR), engage the starter (ER), and start it by turning the
ignition key
4) Carefully accelerate the engine speed and let the engine reach its working
temperature.
5) Accelerate the engine to maximum speed. (see note on SLIPPAGE page 48 )
6) Rotate the roll forward by pushing the yellow button left the hopper.
7) Start shredding
Functioning and execution