①
Viewing window
②
Air hole
③
Speculum attach groove
④
Power LED Lamp
⑤
Switch
⑥
Rechargeable battery
⑦
Recharger connection jack
⑧
Handle separation Line
①
Optical tube
②
Lens
③
Heat sink
④
Power LED Lamp
⑤
Switch
⑥
Rechargeable battery
⑦
Recharger connection jack
⑧
Handle separation Line
②↘
②↘
④↘
④
↖①
①↘
③↘
↖③
⑧↘
⑧↘
⑥↘
⑥↘
↖⑤
↖⑤
⑦↘
⑦↘
www.kscope.kr
OTOSCOPE
THROATSCOPE
①
Viewing window
- Affected parts are enlarged by the 3x lens and it can be opened and closed.
- If the connecting parts is loosed, tighten the connecting screw with a ‘
⊖
‘ driver.
②
Air hole:
If an Insufflator bulb is used, insert the rubber into the hole before use.
③
Speculum attach grooves:
Attach the speculum by slightly pushing and turning it toward the Viewing Window.
④
Power LED Lamp:
- It is Perfectly heat proof for stable used of Lamp.
- If there is problem with the lamp, please contact our A/S Department.
⑤
Switch:
Being a one-touch button switch, it turns on when pressed once and turns off when pressed another time.
⑥
Rechargeable battery
- Then battery can be used continuously for more than 3 hours and a half after one recharge, and the mass
recharge battery that can be recharged and discharged for more than 800 times is attached.
- The bottom handle with the recharger is a single unit, so it cannot be opened and closed. The whole bottom
handle has to be exchanged when exchanging the battery.
①
Optical tube:
Turn the optical tube gently from left to right for focus.
②
Lens:
The light becomes brighter when the Throatscopt light is concentrated.
③
Heat sink:
It is perfectly heat proof for stable used of lamp.
④
Power LED Lamp:
If there is problem with the lamp, please contact out A/S Department.
⑦
Recharger connection jack:
- Insert the plug of the separate recharger into the bottom connection jack of the scope for recharging.
⑧
Handle separation Line:
When changing rechangeable battery pack, turn this part to separate the upper & bottom handle.
