SAEHAN DHD-1, Руководство пользователя

Страница: 21 / 36

21
Setting Mode
1. Press
PWR
button once to turn on the device (in
Testing Mode
).
2. Press and hold the
SET
button for
Setting Mode
. After two beeps, “
set
DATE
” appears on the display and the value for the Month fl ashes.
3. Press the
READ
button repeatedly to advance to the desired Month number (
mm
).
4. Press the
HAND
button once and the value for Day flashes. Press the
READ
button repeatedly to advance to the desired Day number (
dd
).
5. Press the
SET
button once and the value for the fi rst digit of the four-digit
Year fl ashes. Press the
READ
button repeatedly to advance to the desired
fi rst digit of Year (
y
yyy).
6. Press the
HAND
button once and the value for the second digit of the four-
digit Year flashes. Press the
READ
button repeatedly to advance to the
desired second digit of Year (y
y
yy).
7. Press the
HAND
button once and the value for the third digit of the four-
digit Year flashes. Press the
READ
button repeatedly to advance to the
desired third digit of Year (yy
y
y).
8. Press the
HAND
button once and the value for the fourth digit of the four-
digit Year flashes. Press the
READ
button repeatedly to advance to the
desired fourth digit of Year (yyy
y
).
9. Press the
SET
button once. After one beep, “
set TIME
” appears on
the display and the value for the Hour flashes. Press the
READ
button
repeatedly to advance to the desired Hour number (
hh
).
10. Press the
HAND
button once and the value for Minutes fl ashes. Press the
READ
button repeatedly to advance to the desired Minute number (
mm
).
11. Press the
SAVE
button to save the
DATE
and
TIME
. “SAVE” appears
brie fl y on the display, and the DHD-1 returns to
Testing Mode
.
12. Press and hold the
PWR
button to power off the DHD-1.
Note:
The
DATE
and
TIME
settings as well as saved test results are retained after
the DHD-1 is powered off. However, if the DHD-1 battery is completely
discharged, saved test results are still retained when re-connected to a
PC for power, but the
DATE
and
TIME
will be set to their initial values
(06.15, 2011, and 12:00). Enter the
DATE
and
TIME
settings then keep
the DHD-1 connected to a PC until the battery is fully recharged.
DHD-1 Digital Hand Dynamometer – Operation