Saeco XELSIS SM7683, Руководство пользователя

Страница: 11 / 128

Personalizing drinks and creating profiles
This machine allows you to adjust the settings of a drink to your own preference and to save the
adjusted drink in a personal profile. There are two ways to create a profile:
1 In the 'Drinks' menu: Select and adjust a drink and then tap the 'save' icon.
2 In the 'Profiles' menu: Create a profile by tapping the 'add profile' icon. Select the newly created
profile, select a drink, adjust it to your preference and then tap the 'save' icon.
Personalizing your drinks
You can adjust the settings to your own preference:
1
Tap the Drinks icon.
2 Select your preferred drink.
3 The screen shows the settings you can adjust to your preference. Tap on the arrow to go to the
next screen for more settings to adjust. Depending on the type of drink, you can adjust strength,
volume of coffee, milk and foam, temperature, the taste and the order of brewing milk-based
drinks.
4 Swipe the bars you want to adjust up or down to your preferred level (Fig. 6).
5 You can save these settings to your profile by tapping the 'saving' icon and following the
instructions on the screen (Fig. 12).
Creating a profile
1
Tap the Profiles icon.
2
Select 'Add profile' (Fig. 13).
3
Enter a name for the new profile and confirm (Fig. 14).
4 Select the newly created profile.
5 Add drinks to the profile by selecting 'Add drink' (Fig. 15).
Adjusting machine settings
You can adjust the grinder settings by using the grind setting knob inside the bean container. There
are 12 different grind settings you can choose from. The lower the setting, the stronger the coffee.
Note: You need to brew 2 to 3 drinks before you can taste the full difference.
Caution: Do not turn the grind setting knob more than one notch at a time to prevent damage to the
grinder.
1 Open the lid of the bean hopper.
2 Press down the grind setting knob and turn it to the left or right (Fig. 16). Turn the grind setting knob
one notch at at time. Each time you have turned the grind setting one notch, brew a coffee drink to
prevent damage to the grinder.
3 Close the lid of the bean hopper.
Adjusting default settings
Use the SETTINGS icon to change the following settings:
- AquaClean: To check the status of AquaClean and install a new one.
- Water hardness: to be able to adjust the machine settings to the water in your region, please
measure the water hardness.
- Stand-by time: this is the time after which the machine goes into stand-by mode.
11
English
English