background image

• 6 •

• 6 •

•  Remove the water tank from its place.
•  Rinse and fi ll it with fresh water mak-

ing sure that it is not fi lled exceeding 
the (MAX) level indicated in the tank. 
Put the tank back in its place.

Fill the tank only with fresh, 
non-sparkling water. Hot wa-

ter or any other liquid may damage 
the tank and/or the machine. Do not 
operate the machine if water is not 
present: Make sure there is enough 
water in the tank.

•  Remove the coff ee bean hopper cover.

Note: The hopper may be pro-
vided with different safety 

features according to the regula-
tions of the country of use of the 
machine.

•  Slowly pour the coff ee beans into the 

hopper.

Only coffee beans must be 
put into the coff ee bean hop-

per. Ground coff ee, instant coff ee or 
any other object may damage the 
machine.

•  Replace the coff ee bean hopper cover.

•  Insert the plug into the socket on the 

back of the machine. 

•  Insert the plug of the other end of the 

cable into a wall socket with suitable 
power voltage.

Orange

Black

•  Switch the power button to “I” to turn 

the machine on.

•  Make sure the selector switch is on “

” position; if necessary, turn it to the 
indicated position.

•  To turn the machine on simply press the 

ON/OFF button.

•  The display indicates that the machine 

is priming the circuit.

Note: In some cases you may 
be requested to manually 

prime the circuit. For this operation 
see section “Control Panel Display”.

•  The display shows the ON/OFF icon.

Orange

This cycle allows rinsing the coff ee circuits 
with fresh water.

The cycle is carried out:
•  At machine start (with cold boiler)
•  After priming the circuit (with cold 

boiler)

•  During the Stand-by preparation phase 

(if a coff ee product has been brewed)

•  During the turning off phase after 

pressing the ON/OFF button (if a cof-
fee product has been brewed).

A small amount of water will be dis-
pensed to rinse and heat all the machine 
components; in this phase this icon is 
displayed.

Wait for the cycle to fi nish automatically. 

You can stop dispensing by pressing 
either the coff ee button and/or the 
ON/OFF button.

RINSE/SELFCLEANING CYCLE

Содержание SUP 037DRJ





































Отзывы: