Saeco Royal BLACK, Руководство по эксплуатации и обслуживанию

Страница: 39 / 68

English
39
8
MENU ITEM Description
On This way, when in off position, the coffee boiler is kept at a temperature lower than the
one required when dispensing a beverage.
This way, the machine saves energy but needs more time to start dispensing beverages.
The appliance is factory preset so that this setting is not enabled by default.
Stand-by Settings To set the time interval for the machine to go into stand-by mode after the last brewing.
The default time value is «after 30 minutes».
The currently active setting is inside a dotted rectangular box.
15 minutes Once the set time has elapsed, the machine goes into stand-by mode.
Press any button to turn the machine back on.
After performing the function diagnostics and the warm-up phase, the machine is again
ready for use.
When this parameter is set to "OFF", the machine stays active.
30 minutes
60 minutes
180 minutes
Off
ALARMS
It allows you to activate and deactivate some alarms.
Coffee grounds drawer full
alarm This function allows you to enable/disable the dregs alarms, i.e. the warning on the drawer
with the already brewed coffee pods being full and its need to be emptied.
The currently active setting is inside a dotted rectangular box.
Off alarm disabled
On alarm enabled
Descaling This function enables/disables the warning (no blocking) on the need to descale the
machine hydraulic circuit.
This alert is displayed by a special icon on the "Ready for use" screen (see page 57).
The currently active setting is inside a dotted rectangular box.
Off With this setting, the warning message is disabled.
On With this setting, the warning message is enabled;
the message will be displayed whenever the machine requires a descaling cycle.
Exit This option allows the user to go back to the menu top level
PRE-GRINDING This function enables/disables the pre-grinding prior the next coffee dose.
This way, upon selecting the beverage, the user will already have the coffee powder ready
for brewing and will save the grinding time.
The currently active setting is inside a dotted rectangular box.
Off With this setting, the pre-grinding function is disabled.
On With this setting, the pre-grinding function is enabled;
Pre-brewing This function adjusts the break time between pod pre-brewing and its actual dispensing.
The currently active setting is inside a dotted rectangular box.
Off It disables pre-brewing
Low It activates a short break between pre-brewing and dispensing (2 sec)
High It activates a long break between pre-brewing and dispensing (4 sec)
Temperature This function allows you to adjust any increase/decrease in the coffee temperature inside
the cups
Range from -5 to +5 It allows to lower or increase the temperature of the product on a range between -5 and
+5.
USER PW This function allows you to set or disable the password to access the User menu.
NOTE:
Enter the value '0000' as password to disable the password.
If you forget the PASSWORD, you must start a reset procedure. Please contact Saeco
(Evoca group) customer service.
TECH. PW This function allows you to set or disable the password to access the Tech. menu.
NOTE:
Enter the value '0000' as password to disable the password.
If you forget the PASSWORD, you must start a reset procedure. Please contact Saeco
(Evoca group) customer service.
Warning:
The technical menu password also allows you to access the user menu
SHOW COUNTERS This function enables/disables the display of the total coffee counter, at the time the
machine is turned on.
On In this way, the counter display function is enabled.
Off In this way, the counter display function is disabled.
Exit This option allows the user to go back to the menu top level