8
5
6
7
8
9
1
3
2
4
Insert the fi lter in the empty tank.
The reference mark and the
groove must match. Push fi rmly
until it is completely inserted.
Select “water fi lter” and press
again.
When the machine has fi nished, turn the knob until it is in the rest position (
). Press
a few times until the
“exit” message is displayed. Then press
. The machine is now ready for use.
NOTE: if the Intenza water fi lter is not used, insert the small white fi lter previously removed (see step 1)
into the tank.
Press
.
Select “maintenance” and press
the
button.
Select “activate fi lter” and press the
button.
Turn the knob to the
position.
Water dispensing begins.
3 maintenance
3.1 water filter
3.1.3 activate filter
execute now
INTENZA WATER FILTER
To improve the quality of the water you use, and to extend the life of your machine at the same time, it is
recommended that you install the water fi lter. After installation, select the water fi lter function under the
maintenance menu (see page 21). By setting the water fi lter status to ON, the machine informs the user
when the fi lter must be replaced.
Remove the water fi lter from its packaging, immerse it vertically (with the opening facing upwards) in
cold water and gently press its sides so as to let the air bubbles out.
Remove the small white fi lter from
the tank and store it in a dry place
sheltered from dust.
Fill the tank with fresh drinking
water and re-insert it into the
machine.
Set the Intenza Aroma System:
A = Soft water
B = Medium water (standard)
C = Hard water
Place a container beneath the hot
water/steam wand.
INSTALLATION
1.
1.
2.
2.
2.
3.
1.
