Saeco Primea Ring Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 49

Saeco Primea Ring Скачать руководство пользователя страница 43

41

12

6

5

4

Reassemble it by pressing the
PUSH! button.

Close the service door and insert
the coffee grounds drawer.

The grinder can be adjusted in order to create a ﬁ ner grind after many grinder cycles (approximately 2000).

WARNING!
This operation should be carried out carefully and by an experienced user. The screw could fall into the
grinder; if this happens, remove it before restarting the machine. Protect the grinder hole with a cloth to
avoid this problem.
The snap is signalled by a message on the coffee bean hopper; refer to these messages when this
adjustment is performed.

EMPT Y THE COFFEE BEAN HOPPER.

GRINDER MAINTENANCE

Adjust until it clicks.

Remove screws and service door.

Unscrew the screw that holds the
service door closed.

Then reposition the door and attach it with the previously removed screw.

Apply the grease evenly.

10

11

Once the cycle has ended, turn
off the machine and unplug it.

Press and dispense two coffees.

When the following screen appears,
press

just once.

3

1

strong aroma

espresso coffee 08:33

2

out of coffee

espresso coffee 08:33

«
...
41
42
43
44
45
...
»

Содержание Primea Ring


















































Отзывы:

Нет отзывов