29
1
2
3
4
5
6
7
8
9
To perform descaling before the machine blocks, or before the descaling message appears:
machine settings
maintenance
maintenance
descaling cycle
yes
descaling cycle
descaling
descaling cycle
fill water tank
descaling cycle
insert tank
descaling cycle
Insert the descaler and press
the
key to begin.
The machine begins to
dispense the descaling solution
through the hot water spout.
The dispensing occurs at
preestablished intervals, in
order to allow the solution to be
more effective.
When the solution is fi nished
the following message appears
on the display:
Remove the water tank, rinse
with fresh drinking water to
eliminate traces of descaling
solution, then refi ll with fresh
drinking water.
Insert the tank with fresh
drinking water.
rinse cycle
descaling cycle
rinsing
descaling cycle
done
descaling cycle
Rinse the machine circuits by
pressing the
key.
The machine performs the rinse
cycle. During the rinse cycle, the
machine may require the water
tank to be fi lled.
Press the
key and exit the
programming by pressing the
key. Check the quantity of water
contained in the tank and, if desired,
install the water fi lter or reinsert the
small white fi lter (see page 7).
1.
2.
1.
2.
1.
2.