Saeco nina plus SIN026X, Руководство по эксплуатации

Страница: 9 / 24

• 9 •
English
5 COFFEE BREWING
Warning! During the coffee brewing, do not
remove the pressurized portafi lter by manually
turning it clockwise. Danger of burns.
• During this operation, the "machine ready" light (15) may
fl ash; this is to be considered a standard and not a faulty
operating mode.
• Before using the machine, make sure that the hot water/
steam knob (4) is closed and that there is enough water
in the tank.
• (Fig.3) - Press the ON/OFF button (2).
• Wait until the "machine ready" light (15) turns on. The
machine is now ready for coffee brewing.
5.1 Using Ground Coffee
• (Fig.8) - Insert the fi lter (11) in the pressurized portafi lter
(10); the fi lter is already inserted before using the machine
for the fi rst time.
• (Fig.11) - Insert the portafi lter into the brew unit from the
bottom (6).
• (Fig.12) - Turn the portafi lter from left to right until it
locks into place. Release the portafi lter grip. The handle
will slightly turn to the left. This movement guarantees
portafi lter performance.
• (Fig. 14) - Preheat the pressurized portafi lter by switching
the selection knob (17) to the " " position until some
water spills out of it. This is to be done only for the fi rst
coffee brewing.
• When 50cc of water have fl owed out, switch the selection
knob (17) to the " " position in order to stop brewing.
• (Fig.16) - Remove the portafi lter from the machine by
turning it from right to left and drain any water left. There
is no need to change the fi lter to make one or two coffees,
since the machine is equipped with a special fi lter (11).
• (Fig.9A) - Add 1- 1.5 measuring scoop for single coffee
and 2 measuring scoops for double coffee. Remove any
coffee residues from the rim of the fi lter.
• (Fig.11) - Insert the portafi lter (10) into the brew unit from
the bottom (6).
• (Fig.12) - Turn the portafi lter from left to right until it locks
in place.
• (Fig.13) - Take 1 or 2 preheated cups and place them
under the pressurized portafi lter. Make sure that they are
correctly placed under the coffee dispensing holes.
• (Fig.14) - Turn the selection knob (17) to the " "
position.
• When the desired quantity of coffee has been obtained,
turn the selection knob (17) to the " " position in order
to stop coffee brewing. Wait a few second after brewing
has stopped, then remove the cups of coffee (Fig. 15).
• (Fig.16) - Remove the pressurized portafi lter and empty
the remaining coffee residues.
Note: If a small quantity of water remains in the
portafi lter, this is absolutely normal and is due
to the portafi lter features.
Important note: The fi lter (11) should be kept
clean to guarantee perfect results. Clean daily
after use.
5.2 Using Coffee Pods
• (Fig.10) - Use a coffee spoon to remove the fi lter for
ground coffee (11) from the pressurized portafi lter (10).
• (Fig.7A) - Insert the coffee pod adapter (13) - with the
convex part facing down - into the pressurized portafi lter
(10).
• (Fig.7B) - Then, insert the pod filter (14) into the
pressurized portafi lter (10).
• (Fig.11) - Insert the pressurized portafi lter into the brew
unit (6) from the bottom.
• (Fig.12) - Turn the portafi lter from left to right until it
locks into place. Release the grip from the pressurized
portafi lter. The handle is automatically slightly turned
leftwards.
This movement guarantees portafi lter performance.
• (Fig. 14) - Preheat the pressurized portafi lter by switching
the selection knob (17) to the " " position until some
water spills out of it. This is to be done only for the fi rst
coffee brewing.
• When 50cc of water have fl owed out, switch the selection
knob (17) to the " " position in order to stop hot water
dispensing.
• (Fig.16) - Remove the pressurized portafi lter from the
machine by turning it from right to left. Be careful not to
remove the fi lter.
• (Fig.9B) - Insert the pod into the portafi lter and make sure
the paper of the pod does not overhang the portafi lter.
• (Fig.11) - Insert the portafi lter into the brew unit from the
bottom (6).
• (Fig.12) - Turn the portafi lter from left to right until it locks
in place.
• Take 1 preheated cup and place it under the portafi lter;
make sure that it is correctly placed under the coffee
dispensing holes.
• (Fig.14) - Turn the selection knob (17) to the " "
position.
• When the desired quantity of coffee has been obtained,
turn the selection knob (17) to the " " position in order
to stop coffee brewing, then remove the coffee cup.
• (Fig.16) - Wait a few seconds after brewing, then remove
the portafi lter and dispose of the used pod.
Important note: The fi lter (14) and the adapter
(13) should be kept clean to guarantee perfect
results. Clean daily after use.