Should an extension cord be used,
check its perfect condition.
The extension cord must have a minimum section
of 1 mm
2
and must be supplied with a three-pole
plug/socket.
Starting and use
Danger!
Electric voltage may cause
death. Electrical parts should never be in
contact with water: danger of short-circuit.
Overheated steam and hot water may cause
burns!
Do not direct steam or water jet towards the
body; furthermore, great attention must be
given when touching either the dispensing tube
or the heating plate: danger of burns!
For your own safety as well as for other people
safety, keep to the safety precautions described
(see pages 26/27).
Never use the machine without water
and coffee beans.
Remove measuring spoon, brush and the central
unit key from the coffee grounds container (1) and
keep them within reach.
Unwind the power cord (24) from the rear side of
the machine.
25
Coffee bean container (11) is attached with
two screws.
Remove the cover (12) and fill it with coffee
beans (approx. 300 g), then replace the cover.
Adjust grinding by means of the grind adjust-
ment lever (13), positioning it on point "5" of the
scale.
Unpacking/Installation
Standard packing is strong enough to protect the
machine during mail shipping.
Keep this package to return the machine to the
manufacturer, should it be necessary.
Before installing the machine, follow the following
safety precautions:
Position the machine in a safe place.
Do not allow children to play with the
machine
Make sure the machine is not placed
nearby hot surfaces or open flames.
Whenever possible, always use the machine with
the swivel (21).
Thus, when installing the machine, make sure to
rest it directly on this support by inserting it into the
slot on the lower side of the machine.
Now the machine is ready to be connected.
Power supply connection
Warning: electric current may cause
death! Always keep to safety indica-
tions.
The coffee machine must be connected to an
adequate socket.
Voltage must suit to the voltage specified on the
appliance rating plate.
Never use defective power cords.
Defective power cords and plugs
must be replaced by authorised personnel.
28
CONTROLS AND MACHINE PARTS
29
UNPACKING/INSTALLATION
1
Coffee grounds container
2
Drip tray
3
Cup holder grill
4
Coffee dispenser (removable)
5
Steam/hot water dispensing tube with heat
protector
6
Steam/hot water selection knob
7
Heating plate
8
Water tank
9
Water tank cover
10
Water level
11
Coffee bean container
12
Coffee bean container cover
13
Grind adjustment lever
14
Pre-ground coffee container with cover
15
Service door
16
Central unit
17
Filling funnel
18
Handle for assembling and disassembling
of central unit
19
Coffee adjustment lever
20
Coffee rest drawer
21
Swivel (removable)
22
Control panel with warning lights
23
LED warning light showing fill level in cup
24
Power cord
Control panel description
Temperature warning light
Off: working temperature too low
On: right working temperature
Blinking: excessive working temperature, carry
out drainage
Main switch
1 or 2 cups of regular coffee
1 or 2 cups of espresso coffee
1 or 2 cups of tall coffee
Pre-ground coffee selection button
Heating plate selection button
Steam selection button
Central unit warning light
On: the central unit is not correctly mounted
Blinking: the central unit is missing
Descaling warning light:
On: descaling required
Coffee grounds container warning light:
On: the container is full
Blinking: the container has not been properly
positioned
Coffee bean container warning light
On: the coffee grinder is jammed
Water tank warning light
On: the tank is empty
Blinking: pump is not functioning properly; it
must be drained
