• 10 •
Machine Use - User Manual
3.3
Turning on the Machine
Warning! Connection to the power supply should
be carried out exclusively by the service provider!
Before turning on the machine, ensure that the plug is correctly
inserted in the power socket.
1
To turn on the machine, move the power button on the back
of the machine to "I"
(Fig.02, page 3)
.
2
After carrying out a check cycle, the machine goes into
Stand-by mode and the "
" button (21) blinks.
3
To turn on the machine simply press the "
" button (21).
Note: Once the warm-up is complete, the machine
performs a rinse cycle of the internal circuits. A
small amount of water is dispensed during this process.
Wait for this cycle to be completed.
3.4
Warm-up and Rinsing
1
Upon start-up, the machine activates the warm-up phase.
Wait until it is completed.
YELL
OW
Note: The progress bar indicates that the machine
is warming up the system.
2
Once the warm-up is complete, the machine performs a rinse
cycle of the internal circuits.
YELL
OW
Note: The progress bar indicates that the machine
is performing the rinse cycle of the system.
3
A small amount of water is dispensed from the coff ee dis-
pensing spout. Wait for the cycle to end.
Note: The cycle can be stopped by pressing the "
" button (18).
4
When completed, the machine is ready for use.
GREEN
Note: If the machine is being used for the fi rst
time or after a long period of inactivity, contact
the Service Provider to start it up.
3.5 Rinse/Self-Cleaning
Cycle
This cycle allows the internal coff ee circuits to be rinsed with fresh
water. The cycle is carried out:
• At machine start-up (with cold boiler);
• After priming the circuit (with cold boiler);
• During the Stand-by preparation phase (if at least one coff ee-
based product has been brewed);
• When turning off the machine, after pressing the "
"
button (21) (if at least one coff ee-based product has been
brewed).
A small amount of water will be dispensed to rinse and heat all
the machine parts; in this phase this icon is displayed.
YELL
OW
Wait for the cycle to fi nish automatically. The dispensing process
can be stopped by pressing the "
" button (18).
