Saeco IPERAUTOMATICA PREMIUM D.A. 3P2016, Руководство по эксплуатации и обслуживанию, Страница: 26 / 68

English
26
8
8 PROGRAMMING AND MAINTENANCE MENU
8
This section illustrates how
to set up or modify the
vending
machine
programming and
maintenance settings.
8
Therefore it is necessary to
carefully read it and to
understand
the exact
sequence of operations
before performing them.
8
8.1 Key description of
programming and
maintenance phases
8
To scroll through the vending machine menu, the keys
described below are used.
8
"e" Key: ENTER
8
By pressing this key it is possible to enter the following
programming or maintenance level. It is also possible
to modify or confirm the values set in the entries of
the programming or maintenance menus.
8
"c" Key: CANCEL
8
By pressing this key it is possible to go back to the
previous level of the programming or maintenance
menu. It is also possible to avoid storing the previously
modified values.
8
"v" Key: DOWN
8
Pressing this key it is possible to access the previous
entry inside the same level. If used after a setting
modification request, the value of this setting
decreases.
88
"^" Key: UP
8
By pressing this key it is possible to access the next
entry inside the same level. If used after requesting the
change of a setting, the value of this setting increases.
888
8.2 Programming Menu
8
The structure of the programming menu is indicated in
section "Structure of the Programming Menu".
88
The section "Description of Messages in the
Programming Menu" describes all the items in the
programming menu.
8
8.2.1 Access to the Programming
Menu
8
Open the door, disable the safety device (see section
"Safety Devices") and press the P1 key to enter the
programming menu.
88888