Saeco ESPRESSO RUBINO 200 T.T.T. SG200E, Эксплуатация и обслуживание

Страница: 16 / 72

16
English
- connect the tap to the vending machine, using
a copper or nylon hose, suitable for foodstuff
and resistant to the supply pressure. Should
a flexible hose be used, it is necessary to
assemble the reinforcement bearing inside,
supplied with the machine.
- Use a 3/8 gas-type connection.
6.5 Power supply connection
Warning
The Maintenance Technician, who is responsible
for the vending machine installation, must
ensure that:
- the electric system complies with current
regulations on safety;
- the mains voltage corresponds to that
indicated on the data plate.
If in doubt, do not proceed with the installation
but ask skilled personnel, qualified to carry out
these tasks, to carefully check the system.
- The machine is equipped with power cord
(fig.16)
6.4 Water system connection
Before connecting the vending machine to the
water mains, make sure that the water is:
- drinkable, if necessary by means of a test
laboratory certification
- has a pressure ranging between 1.5 and 8
bar, otherwise use a pump or a water
pressure reducer accordingly.
- if not already fitted, install a tap in an
accessible position, so as to separate the
equipment from the water mains, should it
be necessary (fig. 14).
- let some water flow out of the tap in order to
eliminate possible traces of impurities and dirt
(fig.15).
fig.14
fig.15
fig.16
For more information visit www.Gumball.com | 800-260-0010 | +1-214-550-5079