43
3
2
1
After approximately 2000 grinding cycles, the grinder needs a slight adjustment to ensure it is running in
peak condition.
WARNING!
This operation should be carried out carefully and by an experienced user. Empty the coffee bean hopper
The screw could fall into the grinder; if it happens remove it before restarting the machine. Protect the
grinder hole with a cloth to avoid this problem.
The snap is signalled by a message on the coffee bean hopper; refer to these messages when this
adjustment is performed. Be sure to empty the coffee bean hopper before starting. Note: the screw could
fall into the grinder; if that happens, be sure to remove it before continuing the cleaning.
GRINDER MAINTENANCE
Adjust until it clicks.
Remove screws and service door.
Unscrew the screw that holds the
service door closed.
Then reposition the door and attach it with the previously removed screw.
10
12
11
Apply the grease evenly.
Insert the coffee grounds drawer.
Close the service door.
Insert the washed and dried Brew
Group. DO NOT PRESS THE
“PUSH” BUTTON.
Espresso Italia PTY LTD
www.espressoitalia.com.au
Freecall 1300 660 976
