Saeco AMBRA SUP 015VR, Руководство по эксплуатации и техническому обслуживанию, Страница: 23 / 36

English
23
8 - USE OF THE VENDING
MACHINE
Important
Read this manual in full before using the machine so as to
become sufficiently familiar with its functioning.
Before using the machine after a period of inactivity it is
advisable to read again paragraph 8.3 “First switching on”.
8.1 Machine status
Depending on the power supply, the status of the machine
can be as follows:
Off and electrically insulated
•
Main switch (Fig. 5) in “
0
“ position.
•
Only the settings memory is on.
On
•
Main switch in “
I
“ position.
•
All functions are on and the display (ref.
8
- Fig. 1) is
lit.
Energy saving
It indicates the energy saving of the machine when the
TIMER function is on (see SETTINGS) and automatically
turns the machine on and off.
•
Main switch in “ I “position;
•
The display shows the message: “
ENERGY SAVING
”.
•
Settings memory is on.
•
The machine is not dispensing beverages.
8.2 Recommendations
Prolonged inactivity
Following a long period of inactivity, the circuit should be
fully cleaned for hygienic reasons.
Place a cup under the hot water spout (ref.
7
- Fig. 1) and
fill it with water by pressing the hot water key.
Temperature control
Every time the machine is started, the display reads:
“WARMING UP......“
When the necessary temperature has been reached, the
display reads:
“SELECT PRODUCT “
“READY FOR USE “
Bean hopper empty
When the bean hopper is empty, the coffee grinder stops
and the display reads:
“COF. BEANS EMPTY “
“READY FOR USE “
The dispensing LED inside the coffee selection key turns off.
The message “
READY ” refers only to the availability of hot
water.
Fill the coffee bean hopper and eliminate the
NO COFFEE
message by holding the Espresso key down for 5 seconds.
Water tank empty
When the water tank is empty, the program stops automati-
cally and the display reads:
“FILL WATERTANK “
Fill the tank and restart the cycle.
Dump box full
When the Dump box contains 30 used coffee grounds, the
display reads:
“DREGDRAWER FULL “
“READY FOR USE “
The machine can dispense water only; remove and empty
the drawer.
The message “
READY ” refers to hot water dispensing only.