SAE J2716 Gateway User’s Manual
MACH SYSTEMS s.r.o.
Page
5
of
17
PC application
Free-of-charge PC application (Windows) for
device configuration, reception and
transmission of SENT Fast/Slow frames
Firmware
Upgradable from PC
Microcontroller
16-bit DSP
Communication Interface
Protocol
Binary protocol for easy integration
SENT-RS232
RS232: 115200, 8N1
SENT-CAN
CAN bus with configurable parameters:
Baud Rate, Sample Point, RX/TX CAN
Identifiers
This allows multiple devices on the same bus
Electrical and Mechanical
Power
9 - 30 V DC (polarity protection)
5 V DC output for sensors (limited to 200 mA)
Consumption
50mA @ 12 V
(5V output is not considered)
LEDs
3x Status Indicator
1x Power
Button
1x Tactile switch (reset factory defaults)
Connectors
1x D-SUB-9 F
1x Terminal Block 8-pin, 3.5 mm pitch
Dimensions (L x W x H)
108 x 54 x 30 mm
Weight
80 g
Operating Temperature
-20 to 60
°C
Protection
IP40
Placement
Table (adhesive pads included)
DIN-rail mount (clip sold separately)
Table 1 Technical Specification
